Comprehensive energy-saving green night lighting

At present, the construction of urban lighting is booming, especially in the major festivals and celebrations, night lighting has become an indispensable landscape. However, due to the lag of landscape lighting planning, lighting project their disorderly development, so that the whole city is scattered at night. To highlight the local characteristics of Shenzhen, reflects the achievements of the reform and opening up, in the implementation of related laws and regulations, norms and standards, follow the upper planning principle, according to the understanding of the port of Luohu, the people of south area, Shennan Road East and other surrounding areas and landscape architectural design, the optical properties of a variety of lighting, art lighting system the landscape design, to create a new bright spot lighting of Shenzhen.

1 follow the national urban lighting indicators, to ensure the rational use of energy

The country has successively promulgated the "architectural lighting design standards" GB50034-2004, "city road lighting design standards" CJJ45-2006 "and the city landscape lighting design standard" JGJ/T163-2008 lighting standards, in accordance with the provisions of lighting indicators within the project area, high energy consumption, residential lighting improper lighting brightness light penetration, lack of control etc. the problems of scientific configuration, improve the level of comprehensive control technology, reduce light pollution, to achieve energy saving and environmental protection requirements.

2 green lighting electrical products, lay a solid foundation for green lighting

The green environmental protection lighting environment is a system engineering, which takes the design as the leading factor, the science and technology as the core, the product renewal as the support, and the city management as the driving. The use of green lighting and lighting equipment, control of operating costs, the use of energy-saving lamps and energy-saving light source reasonable, scientific research achievements have been applied in a lot of energy saving lighting control system, the output power saving lighting control system more than 95% energy-saving lamps, extend the life of 3 to 4 times, the power range of 10% energy-saving lamps 100%, provide a control measure of humanity for building energy-saving lighting. High power factor lighting control equipment to achieve the goal of energy saving.

3 the use of intelligent lighting control system, from the management of energy-saving returns

Green lighting should be a reasonable combination of intelligent lighting control system and energy-saving lamps. The project area by city nightscape lighting lighting automatic monitoring system, through the China Mobile GPRS communication network, computer control system to realize remote control of lighting equipment, teleindication, telemetering, management and other functions, with high reliability, practicability, expansibility and economy of lighting automatic monitoring system. The monitoring center is the core of city lighting monitoring system, the monitoring center to realize the remote control and management of city lighting system, and finally realize the intelligentized management of city lighting system, can be extended to cable anti-theft system. In the future, according to the situation of the capital and the development of the city, to further expand the system, the full realization of modern management of urban lighting.

The latest computer technology have been widely used control system, can complete display status of various floors of the lighting circuit and power consumption in a control interface, the intelligent control system according to the opening and closing time, the working state of lighting equipment automatic adjustment of each partition, and can be controlled according to the need of each loop of light the scene. The control software has the permission setting function, and the corresponding control interface can be opened according to the user's different permission level. Lighting control system of the astronomical clock will automatically according to the date, time, different preset control switch.

The system structure is as follows:

Monitoring center: the realization of automatic monitoring and management, maintenance management, information management, emergency management, the establishment of the basic database, the basic GIS, dynamic data services, communication data protocol conversion. In the monitoring center with a number of computer and server equipment to establish a computer local area network, realize the acquisition, processing and control field data through the GPRS communication service at the same time, through the large screen system, the site situation, data report and the reaction of display, management and decision-making for users.

Communication layer: lighting equipment monitoring mainly uses GPRS communication mode, the support module includes data encryption and compression, wireless transmission and synchronization, electronic map auxiliary function.

Collecting the execution layer: realizing the automatic data acquisition and control of the lighting equipment.

4 use renewable resources

In a number of decorative lamps can be used these renewable cleaning, such as solar lawn lamp is a very practical products. In the long run, renewable resources will be the most important source of energy for the future of mankind, the state is also very attached importance to the important role of renewable energy in the future.

The combination of solar energy and building can effectively reduce building energy consumption; in the installation, on-site power generation access to the Internet to reduce dependence on municipal facilities; no emissions, do not consume any fuel.

Wind solar hybrid power generation can save a lot of lighting and landscape power and other non power supply. In a number of decorative lamps can be used these renewable cleaning, such as solar lawn lamp is a very practical products.

In the long run, renewable resources will be the most important source of energy for the future of mankind, the state is also very attached importance to the important role of renewable energy in the future.

In the new renewable energy, photovoltaic power generation and wind power generation is the fastest growing, solar and wind power generation as an inexhaustible clean energy.

The combination of solar energy and building can effectively reduce building energy consumption; in the installation, on-site power generation access to the Internet to reduce dependence on municipal facilities; no emissions, do not consume any fuel.

Wind solar hybrid power generation can save a lot of lighting and landscape power and other non power supply. Special note: this site reproduced all the comments do not represent the views of this site, such as the need for related products, please contact the site, the copyright belongs to the original author.

In a number of decorative lamps can be used these renewable cleaning, such as solar lawn lamp is a very practical products.

5 landscape lighting using energy-saving composite design concept

This form of "integration" is the function of the hidden and highlight the landscape. The lamps we use are no longer classified as a single thing, no longer limited to its function and nature. There are many road public facilities, such as lighting, rest seats, flowerpot rack, dustbin, signs and other facilities, these functions will be integrated together, it is also a good way to save space and resources.

For people who really need is the light emitted by the lamp, rather than the lamp itself.

The traditional street lamp with high lever, is independent of the facilities, there are sufficient natural light during the day, do not need it as a form of artificial instruments too show, but as part of a "city landscape into" space background of the city streets.

This form of "integration" is the function of the hidden and highlight the landscape.

The lamps and lanterns used are no longer classified as a single thing, no longer limited to its function and nature.

There are many road public facilities, such as lighting, rest seats, flowerpot rack, dustbin, signs and other facilities, these functions will be integrated together, it is also a good way to save space and resources. Copyright statement: this site articles are from the network, if there is infringement, please contact the station staff, we immediately removed after receiving, thank you! QQ:37668441.