How to choose the lighting equipment of the passenger station?

For the central waiting hall, the use of the two reflection of light to provide a bright, comfortable, no glare waiting room. Accurate illumination distribution will be divided into 300, space, and 200lx in the three areas, the crowd will be reasonably guided to the waiting area, public areas and the ticket area. The platform area adopts 200 - 300lx illumination standard. Out of the channel is the use of cooling top surface and the wall of the two sides of the method to create indirect light, 300lx above the facade and the effect of the formation of the 150lx contrast.

For the central waiting hall, the use of the two reflection of light to provide a bright, comfortable, no glare waiting room

Large number of life saving lamps are used in the project to reduce maintenance costs. For the choice of lighting equipment, the following points:

1 light sources and lamps should have high operating reliability and long service life.

2 lamps require durable, good seismic performance, heat dissipation ability, and reach the standard maintenance factor.

3 space height is lower than 5m, should choose the three color straight tube fluorescent lamp or small power single end fluorescent lamp; higher than 5m can choose metal halide lamp or high-power single end fluorescent lamp.

4 pairs of glare value requirements of the place, it is appropriate to use light-emitting surface area, low degree of finish, good light diffusion performance of lamps.

The calculation on the central waiting hall of indirect lighting, to accurately understand the smallpox material, elevation of different materials and ground material reflectivity and reflection mode, then light loss to remove humidity and dust into space selected, combined with the traffic building maintenance cycle caused by the loss of light and natural light, light distribution is calculated accurately by using the parameters of manufacturers, to get more accurate results.