Toshiba Leading (Tokyo Pinchuan) in 7 days this month to offer to the light emitting diode (LED) is a new type of bedside lamp light source (4 models). LED has a high degree of light directivity, can focus on a light, inhibit light leakage. In the hospital, welfare facilities installed in the bedside, at night can easily illuminate the place between the hands.
This new product is Toshiba for the first time in this series of products in the bedside lamp with LED light source, the lamp brightness equivalent to 40W incandescent lamp, but the power consumption is only 1/20, while carbon dioxide emissions are also reduced to 1/20, which makes the products be used in the hospital bedside lamp products the most energy saving.
Product features:
1 brightness equivalent to 40W incandescent, power consumption is only about 1/20
With the company 40W using incandescent lamp bedside lamp
A LED (LEDA-21001W-LS1)
compare
Brightness (note)
About 300 LX
About 300 LX
Roughly equal
Consumer power
36W
1.8W
About 1/20
CO2 output / year
28KG
1.4kg
About 1/20
Note: the distance between the lamp and the irradiated surface is 600mm, and the average brightness is within the range of illumination.
2 suitable reading environment
Suitable for reading at the bedside brightness (about 300Lux), to ensure that the size of the A4 magazine in the open can be fully exposed to the maximum inhibition of light leakage. Moreover, the LED light source does not emit heat rays, and the heat in the irradiation direction is greatly reduced.
3 about 40000 hours of service life
The use of the company's unique thermal design, to ensure that the service life of about 40000 hours, 40W incandescent lamp is about 40 times, while saving resources while reducing the number of replacement lamps.
4 excellent durability, easy installation
The rocker arm can swing up and down 20 thousand times. The lamp comes with the power supply device, as long as the lamp comes with the power cord and 100V socket connection can be used, easy to install and use.
Additional instructions:
LED incandescent lamp bedside lamp with 40W light leakage comparison
Note: the following is the setting of the scope of the A4 size of the magazine when the state of the opening, the diameter of 400mm
The average intensity of 1.LED irradiation in the illumination of the bedside lamp written irradiation area of 400mm diameter: 292Lux 500mm the location of the center distance of the light illumination 1Lux lamp and lighted the distance: 600mm
The average illumination of 2 traditional 40W incandescent lamp irradiation in writing illumination 400mm diameter: 297LUX irradiation area distance light center 500mm unknown illumination 68LUX lamp and lighted the distance: 600mm
Source: China Semiconductor Lighting Network
Contact: mack
Phone: 13332979793
E-mail: mack@archled.net
Add: 3rd Floor, Building A, Mingjinhai Second Industrial Zone, Shiyan Street, Baoan, Shenzhen,Guangdong,China